Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Document Status

This document is a Pre-Draft Deliverable of the ToIP Foundation Technical Stack Working Group. 

The current version is Working Draft 01.

Introduction

This is a specification for an extension to the W3C Decentralized Identifiers (DIDs) 1.0 specification to support the resource parameter as listed in the W3C DID Specification Registries 1.0. It specifies the syntax and normative behavior for usage of the parameter and the requirements for DID methods that support the parameter.

Terminology

In this document, the key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL", when appearing in ALL CAPITALS, are to be interpreted as described in RFC 2119.

All other terms are linked to their definitions in the W3C Decentralized Identifiers (DIDs) 1.0 specification.

Purpose

The purpose of this specification is to specify how a DID URL may include a parameter that instructs a DID resolver to request the associated verifiable data registry (VDR) to directly return a digital resource identified by a decentralized identifier (DID).

Motivations

The process of resolving a DID and dereferencing a DID URL (meaning a DID that includes an additional path, query, and/or fragment component as defined by the ABNF in section 3.2 of the DID 1.0 specification) is shown in figure 1 from section 7.2 of the spec:

Figure 1: The relationship of DIDs, DID URLs, DID documents, and Resources

The normal pattern for processing a DID URL consists of two steps:

  1. Resolution: Resolving the plain DID (defined by the ABNF from section 3.1 of the DID spec) to a DID document.
  2. Dereferencing: Processing the DID document in order to determine how to dereference the remainder of the DID URL (path, query, fragment, etc.)

The first of these two steps—the DID resolution step—is shown in figure 2.

Figure 2: The normal DID resolution process

For a DID URL, the return of the DID document to the resolver commences the second step of dereferencing the identified resource based on the portion of the DID URL that follows the DID. An example is processing a DID fragment to return a specific public key from the DID document. How dereferencing operates depends on the DID URL and the DID method.

However an exception to this normal 2-step resolution/dereferencing process is when the DID itself identifies a digital resource that can be returned directly from the VDR of the associated DID method. This behavior may be desirable:

  • When the DID serves as a persistent identifier of a machine-readable digital resource that the client wishes to consume directly, such as a data schema, interface definition, or policy definition.
  • When the DID serves as a persistent identifier of a human-readable document that needs a long-lived, cryptographically verifiable identifier such as a legal document (e.g., title, deed, will, regulatory filing), a governance framework, or a non-fungible token (NFT) or any other type of digital asset.

In this case, the client MAY wish to use a DID URL to request that a DID resolver return the identified digital resource in a single step as shown in Figure 3:

Figure 3: Using a DID URL to request a digital resource in a single step

Two important notes about this process:

  1. The DID document is not retrieved by the resolver as part of the dereferencing process. Rather the resolver makes a call to the VDR with the DID URL including a resource parameter conformant with this specification. The VDR then follows the specification of the associated DID method to retrieve the identified digital resource and return that resource to the resolver directly.
  2. The resource parameter serves a different purpose than the alsoKnownAs parameter. The purpose of the alsoKnownAs parameter is to map a DID to an alternative identifier for the same DID subject. This alternative identifier can be any other URI, e.g., a URL, or a URN, or another DID. When the DID is resolved, the value of the alsoKnownAs parameter is returned as a property of the DID document. It is then up to the client to decide what action to take with this alternative identifier. For example, if the value is a URL, the client may choose to dereferencing this URL to retrieve the identified Web resource. In this case, the the alsoKnownAs parameter essentially serves as a redirection mechanism managed by the DID controller. By contrast, the resource parameter:
    1. Does not involve an alternative identifier for the DID subject. The DID is the only identifier needed.
    2. Does not involve any redirection. The DID directly identifies the target digital resource.
    3. Does not require a separate dereferencing step. The DID URL is effectively resolved and dereferenced in one step.

The Resource Parameter

To enable this single-step behavior, this specification defines a DID URL parameter named resource. If a DID method specification supports this parameter, and if a DID URL using that method includes the parameter value resource=true, then when a resolver calls the associated VDR using that DID URL, the VDR returns the identified digital resource, not the DID document.

IMPORTANT: A DID URL that includes the resource=true parameter still has an associated DID document like any other DID. However this DID document is not involved in the combined resolution/dereferencing step. If the DID alone is resolved (without the resource=true parameter), it will still return the associated DID document. There is nothing special about this DID document. It still describes and controls interactions with the identified digital resource just like any other DID document. For example:

If the DID document contains one or more alsoKnownAs property values, those values still identify other instances of the identified digital resource available via other URIs, URLs, or DIDs.

Syntax

The parameter name MUST be resource. The parameter type MUST be a Boolean for which the valid values are true and false. The parameter value of true MUST be case-sensitive and MUST be spelled out exactly. No other renderings of true, i.e.  T, TRUE, 1, -1, and so forth — are equivalent.

Example

Following is an example DID URL based on the fictional did:example: DID method that includes the resource parameter:

did:example:21tDAKCERh95uGgKbJNHYp?resource=true

DID Resolver and Verifiable Data Registry (VDR) Requirements

  1. If a DID URL includes the resource parameter with a value of true, a conforming DID resolver MUST return the digital resource identified by the DID from the VDR specified by the associated DID method provided such resource is available. 
  2. If the DID resolver is unable to return the identified resource. the resolver MUST return the error "Resource not found".
  3. If a DID URL includes the resource parameter with any value other than true (for example, false), a conforming DID resolver SHOULD ignore the parameter.
  4. If the DID alone is resolved without the resource parameter, it MUST return the authoritative DID document as defined in W3C Decentralized Identifiers (DIDs) 1.0. This specification adds no additional requirements to a conforming DID document.

DID Method Requirements

A DID method specification conforming to this specification to include support for the resource parameter:

  1. MUST define:
    1. How the associated VDR shall map the DID to the identified digital resource;
    2. How the VDR shall return the resource in response to a request from a conforming DID resolver.
  2. MAY define additional DID document properties to enable dereferencing to the target digital resource, however this is discouraged vs. the alternative of storing such dereferencing metadata in the VDR itself.
  3. MUST define how this parameter will interact with the following additional DID parameters defined in section 3.2.1 of the DID Core Specification.
    1. versionId
      1. If the versionId parameter is included in the DID URL, the resolver MUST return the identified version of the identified digital resource.
      2. If the identified version does not exist, the resolver MUST return the error: "Version not found".
    2. versionTime
      1. If the versionTime parameter is included in the DID URL, the resolver MUST return the identified version of the identified digital resource.
      2. If the identified version does not exist, the resolver MUST return the error: "Version not found".

Registration with the W3C DID Specification Registries

The resource parameter defined by this specification is registered with the W3C DID Specification Registries 1.0 at the following URL:

https://www.w3.org/TR/did-spec-registries/#resource

Contributors

To comply with the intellectual property rights protections in the charter of the ToIP Foundation (as required by all Joint Development Foundation projects hosted the Linux Foundation), all contributors to this Pre-Draft Deliverable MUST be current members of the ToIP Foundation. The following contributors each certify that they meet this requirement:

Acknowledgements

The authors wish to thank the editors and contributors to the W3C Decentralized Identifiers (DIDs) 1.0 specification and in particular co-editor Amy Guy for her help.

Licensing

This is a publicly available specification published by the ToIP Foundation under the following licenses:











  • No labels